30
Performing
Disabling the Buttons (Panel Lock)
The Panel Lock function lets you disable all buttons.
In this state, the settings will not change even if you inadvertently touch a button while performing.
1. Hold down the [EQUALIZER] button for several seconds.
Panel Lock will be activated.
“----” will be shown in the display, and Panel Lock will be activated.
To cancel Panel Lock, hold down the [EQUALIZER] button once again for several seconds.
Panel Lock will also be cancelled when you turn o the power.
* If you activate Panel Lock while a song is playing or recording, playback or recording will stop.
* You cannot set the FP-4F to Panel Lock if it’s in Function mode (p. 48).
To Next Page
Loading...
