Roland FP-50 - Adjusting the Songs Tempo; Lower the Level of an Audio Files Central Sound (Center Cancel); Transposing an Audio File (Audio Transpose)

Adding Accompaniment to Your Performance
Adjusting the Song’s Tempo
Here’s how to change a song’s tempo.
1. Press the [ ] [ ] (SLOW/FAST) buttons.
MEMO
The adjustable range for an audio le is 75–100–125%.
2. To return the tempo to its original setting, press the [ ]
(SLOW) and [ ] (FAST) buttons simultaneously.
Lower the Level of an Audio File’s Central
Sound (Center Cancel)
This feature lets you reduce the loudness of the central sound of the
audio. You can use it, for example, to reduce the level of a melody or
vocal, so that you can perform the part yourself.
* This feature does not work perfectly with every song. In some
cases it may be unable to fully eliminate the central sound, or
may alter the recording’s tone quality.
* Damper Resonance (p. 38) is not applied while Center Cancel is on.
1. Press the [SONG] and [RHYTHM] buttons simultaneously.
2. Use the [ ] [ ] (SLOW/FAST) buttons to select “C Cancel.”
3. Use the [–] [+] buttons to adjust the value.
Value Explanation
ON Lower the central sound when playing.
OFF Play normally.
4. Press the [SONG] and [RHYTHM] buttons simultaneously
to nish.
Transposing an Audio File
(Audio Transpose)
The selected audio le can be transposed for playback.
* In some cases, transposition (a transpose setting other than 0)
may cause a change in the song’s tone quality.
* If you select a dierent song, the audio transposition setting will
be reset.
1. Press the [SONG] and [RHYTHM] buttons simultaneously.
2. Use the [ ] [ ] (SLOW/FAST) buttons to select “AudTrans.”
3. Press the [–] [+] buttons to adjust the value.
Value Explanation
-6–0–+5
(semitone steps)
Sets the transposition amount, in semitones.
Positive values transpose the pitch upward;
negative values transpose it downward.
4. Press the [SONG] and [RHYTHM] buttons simultaneously
to nish.
MEMO
You can also change the Audio Transpose setting by holding
down the [TRANSPOSE] button and pressing one of the [
] [ ]
(SLOW/FAST) buttons.
23
Operation Guide Getting Ready Performing Recording Registrations Settings
Appendix