Roland FP-50 - Deleting a Saved Registration Set (Delete Registration Set)

Saving Performance Settings (Registrations)
8. Press the [ ] (FAST) button.
9. Press the [–] [+] buttons to select the copy-destination
number.
If you see a registration name next to the number, the number is
already in use.
If you choose to copy to a used number, your new registration will
replace the existing registration.
If you don’t want to erase an existing registration, save to a number
where the name column shows “(Empty).”
If you decide to cancel, press the [REC] button.
10. Press the [METRONOME] button.
The registration set is copied.
NOTE
Do NOT turn o the power while “Working.” is displayed.
11. Press the [SONG] and [RHYTHM] buttons simultaneously
to nish.
Deleting a Saved Registration Set
(Delete Registration Set)
Here’s how to delete a saved registration set from internal memory
or USB ash drive.
1. Press the [SONG] and [RHYTHM] buttons simultaneously.
2. Press the [ ] [ ] (SLOW/FAST) buttons to select “Del Rgst.”
* The following steps are not available if there are no registration
sets saved in internal memory, or if no USB ash drive is
connected.
3. Press the [METRONOME] button.
4. Press the [–] [+] buttons to select the memory where the
set you want to delete is located.
Display Explanation
U (User) Internal memory
S (USB) USB ash drive
5. Press the [ ] (FAST) button.
6. Press the [–] [+] buttons to select the registration set that
you want to delete.
7. Press the [METRONOME] button.
A conrmation message appears.
If you decide to cancel, press the [ ] (SLOW) button.
8. Press the [ ] (FAST) button.
The selected registration set is deleted.
NOTE
Do NOT turn o the power while “Working.” is displayed.
9. Press the [SONG] and [RHYTHM] buttons simultaneously
to nish.
32