Roland FP-50 - Specifying the Visual Control Channel (Visual Control Channel); Changing the USB Flash Drive Mode (USB Memory Mode)

Detailed Function Settings (Function Mode)
Parameter Value Explanation
VC Ch
(Visual Control Channel)
Specifying the Visual Control Channel (Visual Control Channel)
Here’s how to specify the channel on which messages used to control video will be sent (Visual Control Channel).
1–16 Sets the MIDI channel used to transmit MIDI messages to the controlled video device.
USB Mode
(USB Memory Mode)
Changing the USB Flash Drive Mode (USB Memory Mode)
In some cases, when USB ash drive is connected to the USB MEMORY port, it may take longer for data to be loaded, or data may fail to be
loaded successfully. If this occurs, you may be able to solve the problem by changing the USB ash drive setting.
Normally, there is no need to make this setting.
MEMO
This setting is automatically saved in the FP-50.
Auto O
With the factory settings, the unit’s power will automatically be switched o a certain amount of time after you stop playing or operating
the unit.
If you don’t want the power to turn o automatically, change the “Auto O” setting to “OFF.”
REFERENCE
For details, refer to “Making the Power Automatically Turn O After a Time (Auto O)” (p. 33).
MEMO
This setting is automatically saved in the FP-50.
Backup
(Memory Backup)
The FP-50 settings return to their factory defaults when you turn o the power. But if you backup the current settings into internal memory,
they will be restored the next time the power comes on.
REFERENCE
For details, refer to “Retaining Settings After Power-o (Memory Backup)” (p. 33).
FctReset
(Factory Reset)
A factory reset returns all Function Mode settings to their factory defaults.
REFERENCE
For details, refer to “Restoring the Factory Settings (Factory Reset)” (p. 35).
Wireless
You can easily use popular wireless applications, such as the iPhone app, with the FP-50. To enable wireless use, just connect the WNA1100-
RL wireless USB adapter (sold separately) to the USB MEMORY port.
REFERENCE
For details, refer to “About the Wireless LAN Function” (p. 43).
MEMO
This setting is automatically saved in the FP-50.
For details about how to make function
mode settings, see p. 37.
42