Roland GAIA 2 - Page 100

100
Navi
05 Delay
This is a stereo delay.
R outR out
L outL out
Wet Level
Wet Level
Feedback
Feedback
Dry Level
Dry Level
L inL in
DelayDelay
DelayDelay
R inR in
Send Amount
Send Amount
Parameter Value Explanation
Dly Sync
OFF, ON If this is ON, the delay synchronizes with the tempo.
Dly Msec
1–1300 Adjusts the delay time from the direct sound until the delay sound is heard.
Dly Note
Note
1/64T, 1/64, 1/32T, 1/32, 1/16T, 1/32., 1/16, 1/8T, 1/16., 1/8, 1/4T, 1/8., 1/4,
1/2T, 1/4., 1/2, 1T, 1/2., 1, 2T, 1., 2
Feedback
-98–+98 [%]
Adjusts the proportion of the delay sound that is fed back into the eect
(Negative values invert the phase).
HF Damp
Adjusts the frequency above which the delay sound fed back to the eect is ltered out (BYPASS: no cut).
200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000 [Hz],
BYPASS
Dry Level
0–127 Adjusts the volume of the original sound.
Wet Level
0–127 Adjusts the volume of the reverb sound.
06 2Tap PanDly (2 Tap Pan Delay)
The delay sound is heard both at the left and at the right.
Send Amount
R outR out
L outL out
Wet Level
Wet Level
Dry Level
Dry Level
L inL in
Double Double
Tap DelayTap Delay
R inR in
Delay 1
Feedback
Delay 2
Parameter Value Explanation
Dly Sync
OFF, ON If this is ON, the delay synchronizes with the tempo.
Dly Msec
1–1300
Adjusts the delay time from the direct sound until the second delay sound
is heard.
Dly Note
Note
Feedback
-98–+98 [%] Adjusts the proportion of the delay sound that is fed back into the eect.
HF Damp
Adjusts the frequency above which the delay sound fed back to the eect is ltered out (BYPASS: no cut).
200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000 [Hz],
BYPASS
Dly1 Pan
L64–63R Adjusts the stereo location of delay 1.
Dly2 Pan
L64–63R Adjusts the stereo location of delay 2.
Dly1 Level
0–127 Adjusts the volume of delay 1.