Roland GAIA 2 - Edit map 4

17
Navi
[VELOCITY] button[VELOCITY] button
When this is on, you can control the
dynamics via key touch.
[TRANSPOSE] button[TRANSPOSE] button
Hold down this button and use the OCTAVE
[DOWN] [UP] buttons to raise or lower the pitch
range in semitone steps.
* This setting is not stored in the tones.
OCTAVE [-] [+] buttonsOCTAVE [-] [+] buttons
Raises or lowers the pitch range in steps of
an octave.
* This setting is not stored in the tones.
MOD wheelMOD wheel
Adds vibrato to the sound. When you move the wheel
all the way down (towards you), no eect is applied.
The further the wheel is moved up (away from you),
the greater the eect. The wheel doesn’t return to its
previous position even after releasing your nger.
PITCH wheelPITCH wheel
Changes the pitch. Move the wheel
down (towards you) to lower the pitch,
and move the wheel up (away from
you) to raise the pitch. When you take
your nger o the wheel, it returns to
the center position.
MFX
[ON/OFF] button[ON/OFF] button
Turns the MFX on/o.
[TYPE] knob[TYPE] knob
Sets the MFX type.
[CTRL 1]–[CTRL 3] knobs[CTRL 1]–[CTRL 3] knobs
These adjust the MFX parameters.
The parameters to change depend on
the eect type.
CHORUS
[TYPE] button[TYPE] button
Sets the chorus type.
REVERB/DELAY
[TYPE] knob[TYPE] knob
Sets the reverb/delay type.
[CTRL 1] [CTRL 2] [LEVEL] knobs[CTRL 1] [CTRL 2] [LEVEL] knobs
Adjusts the reverb/delay parameters.
The parameters to change depend on
the eect type.
CTRL
EFFECTS
MFX
REV
CHO
Edit map 4
Sets how each controller works.
This congures the eects that add various tonal color.
LFO
Mixer
Eects
Control
Amp
Filter
Common
OSC