Roland GAIA 2 - Page 53

53
Navi
Parameter Value Explanation
Asgn 1–4
Select the parameter to which you want to assign the LFO.
OFF, LFO2 RATE (LFO1), LFO1 RATE (LFO2),
OSC1 PITCH, OSC2 PITCH, OSC3 PITCH,
OSC1 POS, OSC2 SHAPE, OSC3 SHAPE,
PITCH DEPTH, PITCH ATK, PITCH DCY, XMOD,
OSC1 LEVEL, OSC2 LEVEL, OSC3 LEVEL,
DRIVE, CUTOFF, RES, FENV DEPTH, FENV-ATK, FENV-DCY, FENV-SUS, FENV-REL,
AENV-ATK, AENV-DCY, AENV-SUS, AENV-REL, LEVEL,
MFX1 (changes according to the assigned MFX Type),
MFX2 (changes according to the assigned MFX Type),
MFX3 (changes according to the assigned MFX Type),
REV1 (changes according to the assigned REV/DLY Type),
REV2 (changes according to the assigned REV/DLY Type), REVERB LEVEL,
OSC1 P-MOD X, OSC1 P-MOD Y, OSC1 S-MOD DPT, OSC1 S-MOD DRV
Asgn 1–4 Depth
-63–0–+63 Adjusts the depth of the LFO applied to the assigned parameter.
FILTERFILTER
Type
Selects the type of lter.
LPF
Low pass lter.
This cuts o frequencies above the cuto frequency. Cutting o the high
frequencies makes the sound more mellow. This is the most frequently-used
type.
BPF
Band pass lter.
This cuts o frequencies except for those around the cuto frequency. This lter
type is useful for making sounds with a unique character.
HPF
High pass lter.
This cuts o frequencies below the cuto frequency. This lter type is useful for
creating percussion sounds and the like that have a distinctive high end.
Slope
-12, -18, -24
[dB/oct]
Selects the lter slope.
Cuto Freq
0–255
Sets the frequency at which the lter that is applied to the frequency
components of the waveform begins to take eect (the cuto frequency).
Resonance
0–255
Emphasizes the portion of the sound around the cuto frequency, adding
character to the sound.
Excessively high settings can produce oscillation, causing the sound to distort.
Cuto Key
Follow
-200–0–+200
Set this to make the cuto frequency change according to the keys you play.
-200
C4C3C2C1 C5 C6 C7
+50
+100
-100
o
-1
-2
+1
+2
Cuto frequency
(Octave)
Key
0
+200
-50
-200
Drive
0–255 Adjusts how much the lter distorts the signal.
Drive Makeup
Sens
-60–0 [dB]
Adjusts the output level from the lter when Drive is applied.
Adjusts the volume with distortion still applied.