15
Chapter 1 Introducing the MC-307
Chapter1
Canceling the Previous Operation
(Undo/Redo)
For songs and patterns, editing (track and microscopic
editing) and recording operations can be canceled.
Procedure
1. Press [SYSTEM] button.
2. Press [F4 (UNDO)] button.
The item subject to UNDO is displayed. For example,
“UNDO MICROSCOPE” appears for undoing
microscopic editing.
3. Press [F4 (EXEC)] button to execute this function, or
press [EXIT] button to cancel.
Upon completion, a “COMPLETED!” message appears on
the display and the screen returns to the initial screen that
appears upon power up.
.
Confirming Performance of
Rhythm Part (Rhythm Part View)
For the rhythm part (PART R), a graphical display is
available for confirming what kind of performances are
recorded for the respective patterns. This operation is useful
when you want to check how the rhythm part performance is
configured.
Procedure
1. Press [RHYTHM PART VIEW] button.
2. From the part buttons, [BD]–[OTHERS], select and press
the button associated with the rhythm tone that you
want to confirm.
Either one of the rhythm tones appeared at the left or
right section of the display can be selected for viewing.
For example, the rhythm buttons [BD] and [CYM] button
can be switched by pressing the appropriate button.
3. Press [ ] or [ ] button to select the location you
want to be displayed.
The display shows groups of numerals, such as "1-1-00,"
indicating "Measure-Beat-Clock."
The following marks are displayed.
: Data exists
- : Data does not exist
* While this screen is displayed, pressing [SCALE] button
changes the unit of one “ .”
* For operations (a) and (c) below, press [ ] or [ ]
button to switch the display between the first half and the
second half of one measure.
- a. Displays half the length of one measure in sixteenth
triplet.
- b. Displays the length of one measure in eighth triplet.
- c. Displays half of the length of one measure in thirty-
second notes.
- d. Displays the length of one measure in sixteenth notes.
* This function cannot be used if the System setting “RHY
VIEW” (P. 122) is set to “MUTE CTRL.”Switch the setting
to “NORMAL” before you use this.
Before Recording/Editing
After Recording/Editing
ecording/Editing
UNDO
REDO
UNDO can be executed for Pattern (track editing,
microscope editing and recording) or Song (editing,
recording).
REDO is an operation of restoring the initial contents
before executing UNDO. Repeating the steps above
after executing UNDO executes REDO
To Next Page
Loading...
Need help?
General
