Roland Groovebox MC-307 User Manual

75
Chapter 5 Creating Your Own Patterns and
Chapter5
Deleting Musical Data
(Delete Event)
Specify the data to be deleted and execute Delete Event.
Procedure
1. Press the [PTN] button.
2. Using the [VALUE] dial or the [INC/DEC] buttons,
select the pattern for which you want to edit.
3. Press the [F3 (EDIT] button.
The “PATTERN EDIT” screen appears.
4. Press the [F3 (MICROSCOPE)] button.
The “MICROSCOPE” screen appears.
5. Using the [CURSOR (up/down)] buttons, select the data
to be deleted.
6. Press the [F2 (DEL)] button.
The “DELETE EVENT” message appears and the
performance data is deleted.
Moving Musical Data
(Move Event)
Specify the data to be moved and determine the destination
before executing Move Event.
Procedure
1. Press the [PTN] button.
2. Using the [VALUE] dial or the [INC/DEC] buttons,
select the pattern for which you want to edit.
3. Press the [F3 (EDIT] button.
The “PATTERN EDIT” screen appears.
4. Press the [F3 (MICROSCOPE)] button.
The “MICROSCOPE” screen appears.
5. Using the [CURSOR (up/down)] buttons, select the data
to be moved.
6. Press the [F3 (MOVE)] button.
The “MOVE EVENT” screen appears.
7. Using the [CURSOR (left/right)] buttons, determine the
measure, beat and clock for the destination.
then, Using the [CURSOR (up/down)] buttons, set the
value.
8. Pressing the [F4 (EXEC)] button.
Move Event is executed.
Viewing Desired Performance
Data Only (View Filter)
With this function, you can view specific data to facilitate
searching for the desired performance data.
Procedure
1. Press the [PTN] button.
2. Press the [F3 (EDIT] button.
The “PATTERN EDIT” screen appears.
3. Press the [F3 (MICROSCOPE)] button.
The “MICROSCOPE” screen appears.
4. Press the [F4 (VIEW)] button.
5. Use the [CURSOR (up/down)] buttons to move the
cursor to the data you want to set.
* For the types of data you can specify, see “Setting Range” at
the end of this section.
6. Use the [VALUE] dial or the [INC/DEC] buttons to set
the data to On and off.
7. When you finish setting, press the [EXIT] button.
The data you turned off does not display in the
“MICROSCOPE” screen.
Available Settings:
- NOTE
- PROGRAM CHANGE
- CONTROL CHANGE
- PITCH BEND
- POLY AFTER: Polyphonic Aftertouch
- CHANNEL AFTER: Channel Aftertouch
- SYS-EX: System Exclusive
- TEMPO
- MUTE

Roland Groovebox MC-307 Specifications

General

Brand	Roland
Model	Groovebox MC-307
Category	Music Mixer
Language	English