Roland Groovebox MC-307

groovebox
Model MC-307
Sequencer section
Date : Oct. 27, 1999
Version : 1.00
MIDI Implementation Chart
Mode 1 : OMNI ON, POLY
Mode 3 : OMNI OFF, POLY
Mode 2 : OMNI ON, MONO
Mode 4 : OMNI OFF, MONO
O : Yes
X : No
RemarksRecognizedTransmitted
Function…
Basic
Channel
Default
Changed
Note
Number :
After
Touch
Mode
Velocity
Pitch Bend O
Prog
Change : True #
O
****************
System
Common
System
Real Time
Aux
Message
Notes
* 1 Omni Off, Poly is transmitted to all channels at start-up.
* 2 When Sync Mode is SLAVE or REMOTE
* 3 When Sync Mode is SLAVE
* 4 Not stored/transmitted even if received, but can be created in the Microscope and transmitted.
* 5 Mode messages (123-127) are stored/transmitted after All Note Off processing is performed. The All Note Off
message itself is not stored/transmitted, but can be created in the Microscope and transmitted.
* 6 Transmitted/received by the sound source section. The sequencer section will perform the action taken reception
is interrupted.
System Exclusive O
Control
Change
True Voice
Key s
Ch s
Default
Messages
Altered
Note ON
Note OFF
1—7, 10
X
0—127
****************
O
O
Mode 3
OMNI OFF, POLY
****************
O
O
: Song Pos
: Song Sel
: Tune
O
X
X
: Clock
: Commands
: All sound off
: Reset all controllers
: Local ON/OFF
: All Notes OFF
: Active Sensing
: Reset
O
O
O
O
X
O
X
X
0–119 O
O
O
0—127
O
1—7, 10
X
0—127
0—127
O
O
X
X
O
O
O
X
X
O
O
O
O
X
O (123—127)
O
X
O
There is no basic channel.
* 3
* 2
* 5
* 6
* 4
* 5
* 6
* 2
* 1