Roland GT-100 - Assigning the [1]-[8] Knob Functions in the Play Screen; Switching Settings with the Number Pedals

Pedal Settings (Control/Expression)
35
Quick Guide Overview Outputting Sound Eects Saving Pedal Settings System MIDI/USB Appendix
Assigning the [1]–[8] Knob
Functions in the Play Screen
Here’s how to assign the functions of the [1] – [8] knobs when they
are operated in the Play screen.
1. Press the [SYSTEM] button.
2. Turn knob [4] to select “KNOB SETTING”.
3. Use knobs [5]–[8] to select the functions of knobs [1]–[4].
4. Press the PAGE [ ] button to access the next page.
5. Use knobs [5]–[8] to select the functions of knobs [5]–[8].
Switching Settings with the Number
Pedals
The GT-100 includes a function that allows you to turn the tuner
on and o, switch preamp channels, and perform other tasks by
pressing the pedal with the same number as the currently selected
patch.
* You can switch the following functions in any condition other
than the Manual Mode (p. 17).
1. Press the [SYSTEM] button.
2. Turn knob [4] to select “PLAY OPTION.”
3. Use knob [8] to select the value for NUM PEDAL SW.
Value Explanation
OFF Not used.
TUNER Switches the tuner on and o.
Ch. A/B Switches between preamp channels A and B.
OD SOLO Switches to tones suited to solo performance.
A/B SOLO Switches the preamp SOLO on and o.
A&B SOLO Switches SOLO on or o for both preamp channels A and B.