50
Restoring the Factory Settings (Factory Reset)
Restoring the GT-100’s system settings (System parameters) to their
original factory default settings is referred to as “Factory Reset.”
Not only can you return all of the settings to the values in eect
when the GT-100 was shipped from the factory, you can also specify
the items to be reset.
* When you execute “Factory Reset,” the settings you made will
be lost. If you want to keep your data, you must save it on a
computer as described in “Transmitting Data to an External MIDI
Device (Bulk Dump)” (p. 48).
* PEDAL CALIBRATION won’t be initialized as the result of a
“Factory Reset” (p. 36).
1. Press the [SYSTEM] button.
2. Turn knob [4] to select “FACTORY RESET.”
3. Use knobs [5] and [8] to specify the areas that will be
returned to their factory-set state.
Knob Parameter Value Explanation
[5]
[8]
FROM
TO
SYSTEM System parameter settings
QUICK
Settings for User Quick
Setting
U01-1–U50-4
Settings for Patch Number
U01-1 through U50-4
4. Press the [WRITE] button.
5. To execute the Factory Reset, press the [WRITE] button.
When the Factory Reset is completed, you’ll be returned to the Play
screen.
If you decide to cancel without executing, press the [EXIT] button.
To Next Page
Loading...
