8
Quick Guide
Connect your guitar and amp.
Minimize the volume!
Turn o the power to the GT-100 and your amp, and set the volume to the
minimum.
1. Connect the AC adaptor.
2. Turn the [POWER] switch on.
3. Turn on the power to your guitar amp.
1
2
1
Getting Ready
This Quick Guide explains basic operation.
For details, refer to the pages shown by the
page XX
symbol.
Connect your guitar and amp.
Turn on the power
Use to adjust the volume.
3
Adjust the volume
For details, see
page 22
For details, see
page 24
Convenient tuner function
1. Press simultaneously.
2. Play an open string, and tune it so that only the center
indicator in the screen is lit.
3. When you’re nished tuning, press
simultaneously once again.
Set the reference pitch Set the OUTPUT mode(p. 24)
* With the factory settings, the GT-100 will automatically
be switched o 10 hours after you stop playing or
operating the unit. If you don’t want the unit to turn o
automatically, change the “AUTO OFF” setting to “OFF” as
described on p. 42.
Note
The settings you were editing will be lost when the unit
is turned o. If you want to keep your settings, you must
save your settings before turning the unit o.
For details, see
page 24
To Next Page
Loading...
