Roland GT-100 - USB-Related Settings; Setting the USB Audio Flow; Setting the MIX LEVEL; Setting the INPUT LEVEL

Making Global Settings (System Settings)
43
Quick Guide Overview Outputting Sound Eects Saving
Pedal Settings
System MIDI/USB Appendices
USB-Related Settings
Here you can make USB-related settings for when the GT-100 is connected to a computer via USB.
USB audio ow
MIX
Level
OUTPUT
Level
GT-100
USB IN
USB OUT
INPUT
OUTPUT
Eect Chain
USB IN-OUT MODE: NORMAL
MIX
Level
OUTPUT
Level
Eect Chain
GT-100
USB IN
USB OUT
INPUT
OUTPUT
USB IN-OUT MODE: DRY OUT
INPUT
Level
OUTPUT
Level
Eect Chain
GT-100
USB IN
USB OUT
INPUT
OUTPUT
USB IN-OUT MODE: REAMP
Reference
For details on USB connection, refer to “Using the GT-100 Connected to a Computer Via USB” (p. 49).
USB
Parameter Value Explanation
USB IN-OUT MODE
Setting the USB audio ow
Here you can specify the audio ow for USB input/output.
NORMAL
The guitar input will be sent through the GT-100’s eects and output to the computer. The input from the computer will be
mixed with the GT-100’s output, and then output.
DRY OUT
The sound of the guitar processed by the eects will be monitored, while the guitar input will be output to the computer
without passing through the GT-100’s eects. The input from the computer will be mixed with the GT-100’s output (eect-
processed guitar sound) and then output.
REAMP
The sound being input from the computer will pass through the GT-100’s eects, and then be output from the GT-100’s OUTPUT
and USB OUT. With this setting, the guitar sound recorded on the computer can be played back through the GT-100’s eects
and output from the GT-100’s guitar OUTPUT and USB OUT.
* If REAMP is selected, the GT-100’s INPUT cannot be used.
MIX LEVEL
Setting the MIX LEVEL
Adjusts the level of the audio input from the computer that will be mixed with the sound processed by the GT-100’s eects when “USB IN-OUT MODE” is
not set to “REAMP”.
0–200 % Adjusts the level of the audio input from the computer that will be mixed with the sound processed by the GT-100’s eects.
INPUT LEVEL
Setting the INPUT LEVEL
Adjusts the input level from the computer to the GT-100’s eects when “USB IN-OUT MODE” is set to “REAMP”.
-20–+20 dB Adjusts the input level from the computer to the GT-100’s eects .