Using the Sequencer
10
Hold down the [SHIFT] button and press the [C# (OCTAVE-)] or [D# (OCTAVE+)] buttons on the keyboard to switch octaves,
and when the keyboard button turns lit, you can delete it.
* Press the [G (CLEAR)] button on the keyboard while holding down the [SHIFT] button to delete all note and phrase data at
once.
Ø Using the Phrase Function(P.16)
Setting the tempo
The tempo is always shown on the display.
1.
Turn the [TEMPO/VALUE] knob.
2.
Hold down the [SHIFT] button and turn the [TEMPO/VALUE] knob to fine-tune the value in decimal
points.
You can set a different tempo for each pattern.
Switching between pages indicated on the panel
You can record sequences in eight pages of eight steps for each pattern, for a maximum of 64 steps.
1.
Hold down the [SHIFT] button and press the step [1]–[8] buttons.
Doing so switches to the respective page.
While you hold down the [SHIFT] button, the displayed page lights up, and the buttons blink as they play back.
If you select a page that’s past the last step, the last step of the page you selected is automatically set as the last step.
To Next Page
Loading...
