Using the Sequencer
13
Starting playback from a specific step
1.
Hold down the [SHIFT] button and press the [ø] (play) button.
Inputting notes in real time
1.
Press the [ó] (record) button.
The [ó] (record) button lights up, and the [ø] (play) button blinks.
2.
Press the [ø] (play) button.
The [ø] (play) button lights up, and real-time input begins.
If a “Count In” value has been set, real-time input begins after the [ø] (play) button blinks a number of times equal to the set
number of count-in beats.
3.
You can press the keyboard buttons to input notes and chords while the step button currently playing
back is blinking.
4.
To exit real-time input, press the [ø] (play) button.
If you press the [ó] (record) button during playback, real-time input starts right when you press the button. You can stop
real-time input but still continue playback by pressing the [ó ] (record) button during real-time input.
To Next Page
Loading...
