Roland LEC-300 - To Customers Who Upgraded the Firmware of the Machine; Precautions Regarding Saved Settings

28
Precautions Regarding Saved Settings
Model
Firmware version
LEC-300/300A/330/540
Ver. 6.30 or later
LEJ-640
Ver. 2.10 or later
LEF-12
Ver. 2.10 or later
If you upgrade the rmware of your machine to the above versions or higher, the bidirectional printing adjustment
specications will be changed.
Therefore, you have to exercise caution when using the [MEDIA SETTING] and [PRESET] menus, which can be used to save
settings related to bidirectional printing as preset patterns. If you continue to use a preset pattern that was set prior to the
version upgrade, defects such as print position misalignment may occur.
We ask that you recongure the settings in the following menus and save a new preset pattern before printing.
Menu Setting item
[MEDIA SETTING]
“ADJUST BI-DIR”
[PRESET]
“ADJUST BI-DIR SIMPLE SETTING”
“ADJUST BI-DIR DETAIL SETTING”
* If you have purchased a new machine, ignore this section.
To Customers Who Upgraded the Firmware of the Machine
3. Supplemental3. Supplemental