Roland LEC-300A - Page 13

Installing the Ink Cartridges
11
1. Changes to the Setup Guide1. Changes to the Setup Guide
10. When this screen appears, make sure the drain bottle is installed, and press .
CHECK
ẅDRAIN BOTTLE
Cleaning is nished.
Go on to “3. Insert the ink cartridges for the respective colors.” (p. 12)
2.Clean the print heads using the SOL INK cleaning cartridge (LEF-12)
1.
Press to select the ink type.
Ink type Display screen
EUV ink
SELECT INK TYPE
ECOUV CMYKGlW
EUV3 ink
SELECT INK TYPE
ECOUV3 CMYKGlW
2. Make sure the drain bottle is installed, and press .
INSTALL
DRAIN BOTTLE
3. Insert cleaning cartridges into displayed slots numbers.
1 2
SET CL-LIQUID
4. Insert dummy cartridges into displayed slots numbers, and press .
SET DUMMY CRT.
SLOT: 3,4
FILLING INK...
5. When this screen appears, pull out the cleaning cartridges.
REMOVE CL-LIQUID
1 2