Roland LEC-300A - Page 27

Switching the Ink Type
25
2. Changes to the User’s Manual2. Changes to the User’s Manual
Important When you use VersaWorks
Be sure to perform the following operation after lling with ink. Otherwise, you cannot use VersaWorks.
Procedure
1. From the [Start] menu, click [All programs (or Programs) ] - [Roland VersaWorks] - [Initialize Application].
2. Click [ Yes ] when a conrmation message for initialization of the application appears.
3. Click [ OK ] when a completion message for initialization of the application appears.
4. Start VersaWorks.
The [ Printer Settings ] window is displayed. This is because the connection with the printer is initialized by performing
Initialize Application.
5. Make the settings of the printer.
• “Printer Connection and Settings” in ”Roland VersaWorks Quick Start Guide”
• ”Making the Settings for Roland@NET” in ”Roland VersaWorks Quick Start Guide”
MEMO
• When you initialize the application, the settings of Roland@NET are initialized as well. Please make the settings again.