Roland MC-101 - Page 4

Panel Descriptions
4
[FX] button
Assigns the [C1]–[C4] knobs to control the FX parameter
of track 1–4.
If you hold down the [SHIFT] button and press the [FX]
button, the COPY screen appears.
5
Pad Section
Pads
(16 pads)
The operation of the pads depends on the pad mode
that’s selected.
Common Section 2
Display
Shows necessary information for various operations.
[VALUE] dial
Turn: Edits a value or scrolls the screen. The operation
depends on what is shown in the screen.
Press: Conrms the editing value or executes the opera-
tion.
[EXIT] button
Returns to the previous screen.
In some screens, cancels the currently-executing func-
tion.
If you hold down the [SHIFT] button and press the [EXIT]
button, the TAP screen appears.
[TEMPO] button
If the [TEMPO] button is lit, you can use the display and
the [VALUE] dial to change the TEMPO setting.
If you hold down the [SHIFT] button and press the
[TEMPO] button, the WRITE screen appears.
PAD [CLIP] button
Switches the pads to CLIP mode. In CLIP mode, you can
use the TRACK SEL [1]–[4] buttons to switch clips in the
selected track.
If you hold down the [SHIFT] button and press the [CLIP]
button, you can then make settings related to CLIP
mode.