Roland RD-600 - Sound Brightness (Filter) and Resetting Settings; Adjusting Sound Brightness (Filter)

Release: This adjusts the time from when you take
your finger off a note until when the sound
decays to silence. Raising the slider will
lengthen the release, and lowering it will
make the articulation crisper.
Adjusting the brightness of the sound — Filter —
The right-most slider adjust the brightness of the sound.
Cay). EE
LOWERARERUPPCR © LOWER-BES UPPER
el
VATEI OCT ELSI
Bl Bl Bl
+3
PART SWITCH/LEVEL
Resetting the modified settings to 0
If you want the settings modified by the sliders to be set to 0, press and hold the [TONE MODI-
FY] button. The indicator located above the sliders that were modified will blink. Press the
desired indicator to set its value to 0.
The indicators of sliders
you modified will blink
PATE GO RLS) BRT
MODIFY B) Bl alo
|
ATTACK DECAY RELEASE BRIGHT:
PART SWITCH/LEVEL
Continue pressing
23