Roland RD-600 - Page 48

OFF OFF ON ON
Sequencer
Thru function
iu LF Es UF Since notes will sound via both route (1) and (2),
ATTACK DECAY RELEASE BRIGHT:
PART
SWITCH/LEVEL
turn
(2)
off.
3. Press a part select button for an INT part to make the indicator light.
4, Begin recording on the sequencer.
5.Select a Tone, and begin playing.
6. When you finish playing, stop the sequencer.
7.When you play back the sequencer, your performance will be reproduced.
*
If
the
receive
channel
of
the
internal
part
corresponding
to
the
selected
INT
part
is
turned
OFF,
there
will
be
no
sound.
If
this
is
the
case,
change
the
receive
channel
setting
(p.45).
48