56
Jan. 2005 RD-700SX
ERROR MESSAGES
Indication: MIDI Buffer Full
Situation: Due to an inordinate volume of MIDI messages received, the RD-
700SX has failed to process them properly.
Action: Reduce the amount of MIDI messages to be transmitted.
Indication: MIDI Communication Error
Situation: A problem has occurred with the MIDI cable connections.
Action: Check that MIDI cables are not broken or pulled out.
Indication: BULK DUMP: Receive Data Error
Situation: A MIDI message was received incorrectly.
Action: If the same error message is displayed repeatedly, there is a
problem with the MIDI messages that are being transmitted to the
RD-700SX.
Indication: File Error
Situation: A file can’t be read. Or a file may be broken.
Action: Be sure you’re using Standard MIDI Files (“MID” is used as the
extension) and Setup Files (“RDS” is used as the extension).
Indication: System Error
Situation: There may be a problem with the system.
Action: Turn on the power once again, then repeat the procedure.
Other Messages
Indication: Now, writing Bulk Dump Data. Keep on POWER!!
Situation: Indicated when Bulk Dump data is being received.
Action: Once received, the data is written to the RD-700SX’s internal
memory; be absolutely sure not to turn off the power until
“COMPLETED” appears in the display.
Indication: Unavailable while in Rec Mode
Situation: This is displayed when the [EXTERNAL/INTERNAL] button is
pressed with Rec Mode “ON.”
Action: When Rec Mode is “ON,” you cannot change the External
settings. To make changes to the External settings, set Rec Mode
to “OFF”.
Indication: Memory Full!
Situation: There is not sufficient space left on the user memory.
Action: Delete files stored on the RD-700SX memory.
Indication: File Exists. Overwrite OK?
Situation: A file with the same name is already exists.
Action: If you execute the procedure, the file will be overwrite. If you
don’t want to overwrite, change a filename.
Indication: Can not Save
Situation: The save could not be performed correctly.
Action: The internal memory capacity of the RD-700SX may be full.
Delete files stored on the RD-700SX memory.
Indication: Can not Delete
Situation: The data cannot be deleted.
Action: Select the File Type to “ALL FILES” in the DELETE screen, then
repeat the procedure.
Indication: Panel is Locked
Situation: Buttons will not function.
Action: Press [EXIT] to cancel.
CHANGE INFORMATION
The changing details
The following issues have been resolved.
When turning on the power, it produces scratchy noise output from LINE
OUT or PHONES OUT rarely.
The noise are not deal with playing keyboard and operation, it produces
generated at a constant cycle (about 23 seconds).
Service Response
Please execute the changing, when only there is a complaint.
Different point
Please confirm the suffix unber on the MAIN BOARD ASSY.
fig.suffix
Before nothing
after 1
PART CODE PART NAME IC NUMBER
Before : 03348812 M12L16161A-7TG IC51
After : 03237689 M12L64164A-7TG IC42
To Previous Page
Loading...
