Roland SH-5 - 4. GENERAL CAUTIONS; 4-1. Fuses; 4-2. Adjustment; 4-3. Slide Switch

1976-10-30 SH-5
4. GENERAL CAUTIONS
4-1. Fuses
When replacing fuses, use only those rated as shown on the caution label on the circuit board.
Repeatedly blown fuses indicate something wrong with the circuits. Using larger value fuses will only aggravate
this condition and will result in damage to the circuits.
4-2. Adjustment
Calibration adjustments should be done in the order given.
Accurate adjustment can be assured only if the procedures are followed exactly as given.
4-3. Slide Switch
Double check the positions of slide switches.
Slide switches set in between positions is the largest cause of malfunction of this synthesizer.
4-4. Replacement of parts
Use only those as specified in the Parts List.
Use of parts other than as specified can cause function instability or circuit damage.
-8-
Scan by Manual Manor
http://www.markglinsky.com/ManualManor.html