28
Chapter 2 Operation
2-2 Loading and Cutting Off Media
Usable Media
For information about media that can be used with this machine, refer to the page indicated below.
☞ P. 118, "Conditions for Usable Media"
Loading Media
Media may be of one of two types: media wound onto a paper tube (called “roll media”) and media not rolled in this
way (called “sheet media”). This section explains how to load media, using roll media as an example. For information
on how to load sheet media, refer to the page indicated below.
☞ P. 76, "How to Load Sheet Media"
CAUTION
Load roll media correctly.
Otherwise the media may fall and cause injury.
CAUTION
Roll media weighs about 30 kg (66 lb.) to 50 kg (110 lb.). Handling roll media is an
operation that must be performed by two persons or more, and care must be
taken to prevent falls.
Attempting to lift heavy media in a manner that taxes your strength may cause physical
injury. Also, if dropped, such items may cause injury.
CAUTION
Never load media that exceeds the loadable weight.
The machine may fail to withstand the weight and tip over or cause the media to fall.
1.
Load roll media and align the left and right sides.
➊
Open the front cover.
To Next Page
Loading...
Need help?
General
