87
Chapter 5 Feature Reference
5-6 Changing the Ink-drying Method
Switching Off the Preheater, Print Heater, or Dryer
Procedure
➊
Press twice.
Use
to select the device.
Press
several times to select "OFF."
Press
to enable the setting.
➋
Press .
Press
to go back to the original screen.
Description
This makes the temperature settings for the media heating system (preheater, print heater, and dryer), as well as
switching these devices on or off. When this is set to "OFF," these devices do not operate at all.
You can also make these settings on the computer. When you've made the settings on the computer, the computer's
settings take precedence and the printer's settings are ignored.
Default Setting
[PRE] (preheater): 35˚C (94˚F)
[PRINT] (print heater): 35˚C (94˚F)
[DRYER]: 50˚C (122˚F)
Determining How the Media Heating System Operates
Procedure
➊
Hold down and press .
➋
Press .
➌
Press .
Use
to make the setting.
Press
to enable the setting.
➍
Press .
Press
to go back to the original screen.
Description
This feature controls the temperature of the media heating system automatically when is dark.
"MENU" performs heating to the preset temperature at all times, without lowering the temperature when
is
dark.
"30˚C" lowers the media heating system to a fixed temperature (30˚C) when
is dark.
"OFF" switches off the media heating system when
is dark.
Default Setting
[PREHEATING]: 30˚C
W 1839mm
SETUP SHEET
ROLL
PRE 35
OFF35
W 1839mm
SETUP SHEET
ROLL
HEATER MENU
FEED FOR DRY
HEATER MENU
PREHEATING
PREHEATING
30 C
MENU
To Next Page
Loading...
Need help?
General
