Roland SONAR V-STUDIO VS-100 - Using the Metronome

34
Using the WAVE recorder
1.
Press the [METRONOME] button.
The metronome function is turned on and the [METRONOME] button flashes.
2.
The metronome setting screen is displayed.
Use the [CURSOR/VALUE] knob to adjust the tempo, beat, and volume of the metronome.
fig.metronome01.eps
3. Press the [WAVE RECORDER] button to return to the main screen.
4.
To turn off the metronome, press the [METRONOME] button again.
The light of the [METRONOME] button turns off.
Using the metronome
Parameter
Description
Tempo
Tempo (BPM)
Beat Beat
Level Volume (0-127)
VS-100_r_e.book 34 ページ ２００９年３月２５日 水曜日 午前９時３４分