35
Using the WAVE recorder
You can play back a file in the background and record only your playing at the same time.
1.
Select the file to play back in the background (See p. 30).
2.
Press and hold the [SHIFT] button, and press the [CURSOR/VALUE] knob.
The main screen displays “BG” to the right of the file name. This indicates that the file is selected for background
playback.
fig.bgMark.eps
3.
Press the
(Record) button.
Recording starts. At the same time, the file selected for background playback starts.
4.
To finish recording, press the
(Stop) button.
5.
When you start playback, the recorded file and the background file are played back
simultaneously.
6.
To cancel the selection of the background file, press and hold the [SHIFT] button and press the
[CURSOR/VALUE] knob.
If the file for the background playback is selected, rewind and fast-forward operations affect both files.
If the background file is longer than the file being recorded, the play button will blink when the recorded
file has played to its end, and playback will continue to the end of the background file.
To display the name of the file for background playback, press the [SHIFT] button.
Recording while playing back a file
VS-100_r_e.book 35 ページ ２００９年３月２５日 水曜日 午前９時３４分
To Next Page
Loading...
Need help?
General
