Roland SONAR V-STUDIO VS-100 - Connecting Audio Equipment and Synthesizers

43
Connections and signal flow
fig.Connect-various.eps
* The sampling frequency of the input signal from digital equipment must be the same as that of the SONAR V-STUDIO
100. For more information about setting the sampling frequency of the SONAR V-STUDIO 100, see “Sampling
frequency setting” (p. 52).
Connecting audio equipment and synthesizers
Synthesizer, etc.
Audio Player, etc.
Recorder, Mixer, etc.
Monitor amplified
speakers
Guitar/Bass
Microphone
Effects, etc.
VS-100_r_e.book 43 ページ ２００９年３月２５日 水曜日 午前９時３４分