Here you will find materials that are useful in helping you get the most out of your SPD-20. Read the
sections as needed.
Taking Advantage of the On-board Effects
Effect list
FX The parameter
TYPE Name Explanation affected by “Time”
1. Room (Bright) A bright-sounding room reverb Reverb Time
2. Room (Standard) A standard room reverb Reverb Time
3. Room (Dark) A dark-sounding room reverb Reverb Time
4. Hall (Bright) A bright-sounding hall reverb Reverb Time
5. Hall (Standard) A standard hall reverb Reverb Time
6. Hall (Dark) A dark-sounding hall reverb Reverb Time
7. Plate (Bright) A bright-sounding plate reverb Reverb Time
8. Standard Plate A standard plate reverb Reverb Time
9. Chorus + Reverb Chorus and reverb Reverb Time
10. Tremolo Reverb Tremolo and reverb Reverb Time
11. Chorus A standard chorus Chorus Rate
12. Chorus + Room Chorus and room reverb Reverb Time
13. Chorus + Hall Chorus and hall reverb Reverb Time
14. Chorus + Plate Chorus and plate reverb Reverb Time
15. Flanger A standard flanger Flanger Rate
16. Flanger + Reverb Flanger and reverb Reverb Time
17. Flanger + Reverb Flanger and reverb Flanger Rate
18. Pitched Delay + Reverb Pitch-shifted delay and reverb Delay Pitch
19. Pitched Delay + Reverb Pitch-shifted delay and reverb Delay Rate
20. Stereo Delay Stereo delay (without feedback) Delay Time
21. Stereo Delay Stereo delay (with feedback) Delay Time
22. Panning Delay Panned delay (without feedback) Delay Time
23. Panning Delay Panned delay (with feedback) Delay Time
24. Chorus + Delay Chorus + stereo delay (without feedback) Delay Time
25. Chorus + Delay Chorus + stereo delay (with feedback) Delay Time
CHAPTER 5 Supplementary Materials
79
1
2
3
4
5
To Next Page
Loading...
Need help?
General
