7
Quick Start
Playing
Playing drums is not only fun, but just about anyone can easily start playing — they make sound when you simply hit them!
Let’s start playing drums using the wide variety of built-in sounds.
Selecting a Drum Kit
A drum kit consists of sounds assigned to each pad. In some
cases, the sound will change depending upon your playing
dynamics.
1. Press the [ ] (DRUM KIT) button.
The DRUM KIT screen appears.
DRUM KIT
01 TD-07
2. Use the dial to select a drum kit.
MEMO
For a list of all the drum kits, use the following QR code to
access the “TD-07 Data List” (PDF).
http://roland.cm/td-07_om
3. Play the drums by striking the pad.
Playing with the Metronome
Here’s how you can play the drums while listening to the
metronome.
1. Press the [ ]
(METRONOME) button.
The metronome turns on, and
the button blinks in time with
the metronome tempo.
MEMO
Alternatively, you can hold down the [
] (ENTER) button
and press the [ ] (METRONOME) button to turn the
metronome on/o without switching screens.
2. Press the [ ] (METRONOME) button once again
to turn the metronome o.
Changing how the metronome sounds
1. In the metronome screen, use the [C][A]
buttons to select the item (parameter) that you
want to set.
2. Use the dial to change the value.
Parameter Value Explanation
ON/OFF ON, OFF
Turns the metronome on/
o.
Tempo 20–260 (bpm) Sets the tempo.
Level -INF–+6.0dB Sets the volume.
Beat 1–9 (beat)
Sets the number of beats
per measure.
Rhythm
ˇ (half note)
Sets the interval of the
metronome.
¸ (quarter notes)
˙ (eighth notes)
¯ (eighth note
triplets)
˜ (sixteenth notes)
Pan L30–CTR–R30 Sets the stereo position.
Sound TYPE1–TYPE15
Sets the sound of the
metronome.
LED Sync ON, OFF
Species whether the
[
] (METRONOME) button
blinks in time with the
metronome (ON) or does
not blink (OFF).
3. Press the [ ] (DRUM KIT) button to return to
the DRUM KIT screen.
To Next Page
Loading...
Need help?
General
