7
Panel Descriptions
Before You Begin Playing
* Before turning the unit on/off, always be sure to turn the volume down.
Even with the volume turned down, you might hear some sound when
switching the unit on/off. However, this is normal and does not indicate a
malfunction.
Turning the TR-6S On
1. Turn on the power in the order of the TR-6S first, and
then the connected system.
2. Switch on power to the connected equipment, and
raise the volume to an appropriate level.
Turning Off the Power
1. Power-off the connected system first, and then the
TR-6S.
Formatting an SD Card (SD CARD FORMAT)
If using an SD card, please format it on the TR-6S. SD cards are sold
separately. Please obtain a SD card separately.
1. Press the [UTILITY] button.
The UTILITY screen appears.
2. Use the [VALUE] knob to select “SD CARD:Format.”
3. Press the [VALUE] knob.
A confirmation message appears.
4. To execute, use the [VALUE] knob to select “O K ,”
and press the [VALUE] knob.
If you decide to cancel, use the [VALUE] knob to select “Cancel,” and
then press the [VALUE] knob.
To Next Page
Loading...
