Step 9: Initial Settings and Ink Filling
1. Make the initial settings.
Procedure
1. Turn on the main power switch.
2. Tap the operation panel.
The operation panel turns on, and the [Language Setting] screen appears.
3. Tap [Language English].
Default setting: [
English]
MEMO
The language selection screen appears.
4. Select the language and tap [OK].
5. Tap [Save].
6. The [Units] screen appears. Set the [Length] and [Temperature].
Default settings
• [Length]: mm
MEMO
1. Assembly and Ink Filling
38 Installation
To Next Page
Loading...
