SG3-540 SG3-300
Printing method Piezo ink-jet method
Media
Width 295 to 1.371 mm (11.7 to 54 in.) 182 to 762 mm (7.2 to 30 in.)
Thickness
Max. 1.0 mm (39.3 mil) with liner, for printing
Max. 0.4 mm (15.7 mil) with liner and 0.22 mm (8.6 mil) without liner, for cutting
Roll outer diameter Max. 250 mm (9.8 in.)
Roll weight Max. 35 kg (77 lb.) Max. 30 kg (66 lb.)
Core diameter 76.2 mm (3 in.) or 50.8 mm (2 in.)
Printing/cutting width
*1
Max. 1,346 mm (52.9 in.) Max. 736 mm (28.9 in.)
Ink
Type TrueVIS INK 500 ml pouch
Color Four colors (cyan, magenta, yellow, and black)
Printing resolution (dots per inch) Max. 1,200 dpi
Cutting speed 10 to 300 mm/s (0.39 to 11.8 in./s)
Blade force
*2
30 to 500 gf
Blade Type Roland CAMM-1 series blade
Offset 0.000 to 1.500 mm (0.0 to 59mil)
Software resolution (when cutting) 0.025 mm/step (0.98 mil/step)
Media heating system
*3
Print heater set temperature: 30 to 45°C (86 to 113°F)
Dryer set temperature: 30 to 55°C (86 to 131°F)
Connectivity Ethernet (100BASE-TX/1000BASE-T, automatic switching)
Power-saving function Automatic sleep feature
Rated input 100-120/220-240 Va.c. 50/60 Hz 8.0/4.1 A 100-120/220-240 Va.c. 50/60 Hz 5.4/2.7 A
Power consumption
During operation Approx. 1,090 W Approx. 710 W
Sleep mode Approx. 50 W
Acoustic noise level
During operation 63 dB (A) or less
During standby 53 dB (A) or less
Dimensions (width × depth × height) 2,632 × 748 × 1,320 mm
(103.7 × 29.5 × 52.0 in.)
2,022 × 748 × 1,320 mm
(79.7 × 29.5 × 52.0 in.)
Weight 183 kg (404 lb.) 150 kg (331 lb.)
Environment
During operation
*4
Temperature: 20 to 32°C (41 to 104°F), humidity: 35 to 80%RH (no condensation)
Not operating Temperature: 5 to 40°C (41 to 104°F), humidity: 20 to 80%RH (no condensation)
Included items Dedicated stand, power cord, media take-up unit, media holders, separating knife, re-
placement blade, cleaning liquid, drain bottle, User's Manual, software (VersaWorks,
Roland DG Connect), etc.
*1 The length of printing or cutting is subject to the limitations of the program.
*2 • 500 gf is the maximum instantaneous blade force.
• The blade force must be adjusted according to details such as the media thickness.
*3 • Warm-up is required after power up. This may require 5 to 20 minutes, depending on the operating environment.
• Depending on the ambient temperature and the media width, the set temperature may not be reached.
*4 Operating environment (Use the machine in an operating environment within these ranges.)
Humidity
Temperature °C (°F)
(no condensation)
Specifications
58 Appendix
To Next Page
Loading...
