Step 1: Assembling the Stand
Procedure
1. Place the caster on the stand leg.
Place the stand leg with the tabletop plate (A) facing down, and then place the caster on top of
the stand leg. The casters have no particular front and rear orientation.
2. Use eight bolts to secure the caster.
(1) Temporarily tighten the bolts in the four lower locations and then in the four locations on the sides.
(2) Fully tighten the bolts in the four lower locations.
(3) Fully tighten the bolts in the four locations on the sides.
1. Assembly and Ink Filling
10 Installation
To Next Page
Loading...
