7. Tap to the right of [Subnet Mask].
The numeric value input screen appears.
8. Enter the subnet mask.
9. Tap [OK].
10. Tap to the right of [Default Gateway].
The numeric value input screen appears.
11. Enter the default gateway.
12. Tap [OK].
13. Tap [Save].
14.
Tap to go back to the original screen.
This completes the setting of a fixed IP address. Go back to the home screen. Then, proceed to Setting the
Software RIP(P. 55).
3. Network Settings
46 Installation
To Next Page
Loading...
