EasyManua.ls Logo

Roland VC-100UHD - Page 22

Roland VC-100UHD
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
Status Screen Parameters
Parameter Content displayed Setup menu
9Analog Audio
Signal In Signal level of analog audio input (CH 1–4) (*2)
Signal Out Signal level of analog audio output (CH 1, 2) (*3)
Input Level CH. 1/2 Audio level of analog audio input (CH 1, 2) (*2)
Congurable
Input0Analog Audio0Level CH. 1/2
Input Level CH. 3/4 Audio level of analog audio input (CH 3, 4) (*2)
Congurable
Input0Analog Audio0Level CH. 3/4
Output Level Audio level of analog audio output (CH 1, 2) (*3)
Congurable
Output0Analog Audio Level
(*2) LINE IN jacks L: CH 1 / R: CH 2, AUDIO IN/OUT connector L: CH 3 / R: CH 4
(*3) LINE OUT jacks L: CH 1 / R: CH 2, AUDIO IN/OUT connector L: CH 1 / R: CH 2
9Pan / Zoom SDI Output
Shows the scaling settings for processing output from the 12G-SDI OUT connector.
Zoom Zoom ratio
Congurable
Channel0CH. 1–80Main Processing, Sub
Processing0Scaling0Size
Size H Horizontal size
Congurable
Size V Vertical size
Congurable
Position H Display position in the horizontal direction
Congurable
Channel0CH. 1–80Main Processing, Sub
Processing0Scaling0Position
Position V Display position in the vertical direction
Congurable
9Pan / Zoom HDMI Output
Shows the scaling settings for processing output from the HDMI 4K OUT connector.
Zoom Zoom ratio
Congurable
Channel0CH. 1–80Main Processing, Sub
Processing0Scaling0Size
Size H Horizontal size
Congurable
Size V Vertical size
Congurable
Position H Display position in the horizontal direction
Congurable
Channel0CH. 1–80Main Processing, Sub
Processing0Scaling0Position
Position V Display position in the vertical direction
Congurable
9Test Pattern / Tone
Press the [PAGE/CURSOR] knob to automatically show the color bars from all outputs. Press the [SETUP] button to return to the previous state.
Pattern Type of test pattern
Congurable
Motion How fast the motion test pattern moves
Congurable
Tone
Type of test tone
The test tone is a sine wave of dierent frequencies output to
the left and right channels (two channels each).
Value (Bold: default)
Disabled 9: 1 KHz
10: 2 KHz
1: 1 KHz
2: 2 KHz 11: 1 KHz
12: 2 KHz
3: 1 KHz
4: 2 KHz 13: 1 KHz
14: 2 KHz
5: 1 KHz
6: 2 KHz 15: 1 KHz
16: 2 KHz
7: 1 KHz
8: 2 KHz
Congurable

Table of Contents

Other manuals for Roland VC-100UHD

Related product manuals