Roland VC-100UHD - Page 25

25
Setup Menu List
USB Streaming
Menu item (Parameter) Value (Bold: default) Explanation
Format
Refer to “Output video formats”
(p. 9)
Sets the output format.
* The selectable formats dier depending on the system’s “Frame Rate” value
(p. 31).
Frame Rate
Sets the frame rate for USB streaming.
Full Uses the same frame rate as the system.
Half Sets the frame rate to half of the system’s frame rate.
Fade to Black
This sets whether the fade eect applied to the output video uses the FTB function or not.
THRU The FTB function is not used.
FTB
The FTB function is used to fade the output video to black.
* The fade time is set in the “Fade Time” system parameter (p. 31).
Connection
–
Shows the connection status.
Press the [PAGE/CURSOR] knob to reconnect.
(Reset)
Audio
0–100–127 Adjusts the USB audio signal output level.
Output Level
Equalizer
Disabled, Enabled
Enables/disables the equalizer.
Hi Freq
20–10k–20k
Species the center frequency when changing the tone quality in the high band.
Hi Gain
-12–0.0–+12
Boosts or attenuates the high band.
Mid Q
0.3–1.0–16
Adjusts the width of the frequency band when boosting or attenuating the
middle band.
Mid Freq
20–1.25k– 20k
Species the center frequency when changing the tone quality in the middle
band.
Mid Gain
-12–0.0–+12
Boosts or attenuates the middle band.
Lo Freq
20–160–20k
Species the center frequency when changing the tone quality in the low band.
Lo Gain
-12–0.0–+12
Boosts or attenuates the low band.
Mastering
Disabled, Enabled
Enables/disables the mastering.
Enhancer
-24–0–-12dB
Adjusts the audio clarity.
Sense
0–24
Adjusts how much the mastering eects are applied.
Level
-24–0dB
Adjusts the volume of the mastered sound.