Roland XP-10 - Page 11

Panel Descriptions
Front panel
1 2 3
Herve beriee
mois
11
1. Volume slider
This adjusts the volume that is output from the out-
put jacks and the headphone jack.
2. Combination palette sliders
These sliders allow you to modify the tone color or
arpeggio pattern etc. while you play. You can specify
the function of the sliders.
3. Display
This shows the selected Tones and the values of vari-
ous settings, etc.
4. Keyboard Mode buttons
These buttons select the keyboard mode. The indica-
tor of the selected keyboard mode will light.
5. Arpeggio on/off button
This button turns the arpeggiator on/off.
6. Arpeggio palette select button
Press this button when you wish to use the sliders or
pitch bender to modify the arpeggio pattern while
you play.
7. Transpose button
This button turns Transpose on/off.
8. Edit button (Exit button)
Press this button when you wish to change various
settings.
9. Utility button (Cancel button)
Press this button when you wish to store or initialize
various settings. When you have mistakenly entered a
value from the numeric keys, this button cancels the
input.
TOWER
5 6 7 8 9 10
DUAL ON:OFF PASTE mranspose = EDT} unuty SEO CTRL
BELECT oO re) oO ar
rer vanain, TTR EreeeL oer
LeveL MOTLEY CONTE REGS
ariel
12 13 14 15 17 16
10. Sequencer control button
Use this button when a sequencer etc. is connected.
Each time you press the button, the sequencer will
alternately play back/stop.
11. Part buttons
These buttons select Parts.
12. Value buttons
Use these buttons to select Tones, Drum Sets, or
Performances, or to modify various values.
13. Performance/Tone button
This button switches between the Performance Select
display and the Tone Select display.
14. User/Preset button
This button switches between User Tones (or Drum
Sets or Performances) and Preset Tones (or Drum Sets
or Performances).
15. Numeric keys
Use these keys to enter a number when selecting or
storing Tones, Drum Sets, or Performances. When
editing, these buttons access the function printed
below each button.
16. Tone Variation button
When a Preset Tone is selected, and if the Preset Tone
has a Variation, this button selects the Variation. If
there are two or more Variations, continue pressing
the button. If a User Tone is selected, this button
switches between USER1/USER2.
17. Enter button
This button is used to finalize the value entered by the
numeric keys, or when storing a Tone, Drum Set, or
Performance.
11