Romac Transmate TapMate

Need help?

Do you have a question about the Romac Transmate TapMate and is the answer not in the manual?

Summary

Machine Specification

Machine Overview

Assembly Procedures

Open Shipping Crate;Workstation

Instructions for opening the shipping crate and accessing the machine.

Cutter and Pilot Identification

Identifies cutters and pilots for Ductile Iron, Cast Iron, and PVC pipe.

About Adapter Hub Sizes

Explains the differences between small and large adapter hubs and their applications.

Adapter Hub Installation and Removal

Details how to install and remove adapter hubs using specific tools.

Set-Up for 4-12 Taps

Step-by-step guide for setting up the TapMate XL-424 for 4" to 12" taps.

Set-Up for 14-24 Taps

Step-by-step guide for setting up the TapMate XL-424 for 14" to 24" taps.

Attaching the Machine to the Valve

Boring Shaft Travel & Distance of Cut

Details on determining shaft travel and cut distance for proper valve attachment.

Operating and Disassembly

Performing the Tap

Step-by-step instructions for executing the tapping operation.

Disassembly and Removal of the Coupon

Procedures for disassembling the machine and removing the coupon after use.

Care and Maintenance

Parts Identification

Base Machine Components

Lists items included with the base TapMate XL-424 machine.

Adapter Bell 4-8 Inch

Detailed breakdown of adapter bells for 4-8 inch sizes.

Adapter Bell 10 & 12 Inch

Detailed breakdown of adapter bells for 10-12 inch sizes.

TM-XL Adapter Bells and Hubs

Breakdown of TM-XL adapter bells for MJ/flange and adapter hubs.

Shaft Head Assemblies and Jam Nut

Identification of small/large shaft head assemblies and jam nuts.

Pilot Assemblies

Identification of TM-XL and TM PVC pilot assemblies.

Shaft Nose Assemblies

Identification of TM-XL and TM shaft nose assemblies.

Major Assemblies

Identification of the hydraulic motor and shipping crate workstation.