EN
39
Parts
Verify the tight fit of the stem: Stand in front of the bike with the front wheel between your knees and
try to turn the handlebar left and right.
→ It should not be possible to turn the handlebar with normal force.
X X
Check the headset for play: Stand next to your bike with both hands on the handlebar. Pull the front
brake lever and gently push the bike backwards and forwards.
→ There should be no play in the headset.
X X
Verify the tight fit of the seat post: Stand behind your bike, hold the saddle with one hand and try to turn
it left and right.
→ It should not be possible to turn the saddle or seat post.
X X
Make sure that all components are tight.
→ If necessary, tighten the parts to the proper torque.
X X
Frame
Check the frame for damage and deformation.
→ There must be no damages.
X X
Check whether all cables and hoses are in the cable clips and verify the tight fit of the clips.
→ All cables must fit firmly in the cable clips.
X X
Suspension elements
Check the suspension elements (if present) for damages.
→ There must be no damages.
X X
To Next Page
Loading...