Quick Start Guide
5
June 2016
Straight run requirements
(1)
Figure 3. Reducer
(2 d to d over a length of 1.5 d to 3 d)
Figure 4. Single 90° Bend Flow from One Branch
Figure 5. Two or More 90° Bends in Same Planes
Figure 6. Two or More 90° Bends in Different Planes
Figure 7. Expander
1. For dimensions, see Table 1 on page-6.
U D
U
D
U D
00825-0100-4686 EA.fm Page 5 Friday, June 17, 2016 4:39 PM
To Next Page
Loading...
