Need help?Do you have a question about the Rosemount 1054B and is the answer not in the manual?
General| Brand | Rosemount |
|---|---|
| Model | 1054B |
| Category | Measuring Instruments |
| Language | English |
Overview of the microprocessor-based pH/ORP analyzer.
Critical safety and operational guidelines for installation and use.
Details electrical hazards and precautions for safe operation.
Alerts regarding hazardous voltage and cautionary advice for safe handling.
Highlights key features and typical uses of the analyzer.
Outlines the physical dimensions, enclosure, and electrical classifications.
Provides detailed performance metrics for pH and ORP measurements.
Provides general advice for selecting an installation site.
Instructions for checking the analyzer upon arrival for damage or missing parts.
Covers the physical mounting procedures for various configurations.
Details the procedures for connecting power and signal wiring to the analyzer.
Illustrates the panel cutout and hardware for mounting the analyzer.
Shows how to install the mounting tabs for panel installation.
Details the installation of the junction box for wall mounting.
Provides the wiring diagram for the wall mount junction box setup.
Shows the procedure for mounting the analyzer on a pipe.
Illustrates the field electrical wiring connections for the analyzer.
Shows the wiring for the integral preamplifier.
Provides dimensions and details for the wall mount enclosure option.
Wiring diagram for integral preamp in a wall mount configuration.
Details how to use the analyzer's keyboard for various functions.
Illustrates the LCD display and key interaction logic.
Provides detailed explanations of each key's main and second functions.
Lists and explains the display mnemonics used by the analyzer.
Introduces the configuration process and the use of the Set Mode.
Recommends using a worksheet to plan and record analyzer settings.
Explains how to access and navigate the analyzer's Set Mode for configuration.
Visual representation of the menu structure for pH configuration.
A detailed worksheet to guide the pH configuration process.
Visual representation of the menu structure for ORP configuration.
A detailed worksheet to guide the ORP configuration process.
How to configure alarm settings, logic, and hysteresis.
Configuration for the interval timer used for sensor maintenance.
Configuration for temperature display and automatic compensation.
Configuration of the analog current output signal.
Configuration of diagnostics for pH electrode health and calibration.
Detailed steps for setting up pH electrode diagnostics.
Setup for temperature compensation and isopotential point.
Configuration of relay and output states during fault or hold conditions.
Configuration for automatic buffer recognition during calibration.
How to set and adjust the alarm setpoints for Alarm 1 and Alarm 2.
Adjusting the output range for current output signals.
Procedure to simulate current output for testing connected devices.
General steps for starting up and calibrating the analyzer.
Procedure to calibrate the temperature reading for accurate compensation.
Steps for calibrating the pH sensor using buffer solutions.
Procedure to standardize the pH sensor against a process sample.
How to view or enter the pH electrode slope.
Guidelines for performing sensor maintenance and placing the unit on hold.
Instructions for preparing standard ORP solutions for calibration.
Procedure to standardize the ORP sensor using a standard solution.
Instructions for setting and managing the user-defined security code.
Describes the operational principles of the pH measurement process.
Describes the operational principles of the ORP measurement process.
Explains the analyzer's automatic diagnostic features and fault reporting.
Lists and defines the fault codes displayed by the analyzer.
A guide to diagnosing and resolving common problems specific to pH measurement.
A guide to diagnosing and resolving common problems specific to ORP measurement.
General troubleshooting steps and specific checks for common issues.
Specific troubleshooting steps related to sensor issues.
Lists available replacement parts and accessories for the analyzer.
Provides general guidelines for returning materials for repair.
Details the steps for returning products under warranty for repair.
The official form to be completed when returning materials for service.
Lists contact details for customer support and a worldwide network of sales/service.
Forms for registering the product warranty and providing customer feedback.
Details the terms and conditions of the product warranty.
To Next Page