Rosemount 1054B - Information Mnemonics

17
MODEL 1054B pH/ORP SECTION 3.0
DESCRIPTION OF CONTROLS
MNEMONIC DESCRIPTION
Ab1 Automatic Buffer 1
Ab2 Automatic Buffer 2
AdJ Adjustment to value reading
bAd Incorrect entry
bF1 Buffer 1
bF2 Buffer 2
doc Displays output current in mA
HLd Analyzer in hold mode
HI Displays 20 mA setpoint (pH/ORP)
itr Interval timer activated
LO Displays 0 or 4 mA setpoint (pH/ORP)
MNEMONIC DESCRIPTION
LOC Access locked - enter security code
Pct Displays pH/ORP output in percent
PH pH Display
OrP ORP Display
SEt Set mode
SiP Simulates current output (percent)
SC1 Simulates current output (mA)
SLP Displays pH electrode slope
SP1 Displays alarm 1 setpoint
SP2 Displays alarm 2 setpoint
Std Standardize pH/ORP
AbF Auto buffer mode
AL1 Alarm 1 setup
AL2 Alarm 2 setup
Atc Automatic temp. comp.
DC Temperature °C
CAL Calibration impedance
setpoint
COd Security Code
cnt Timer count
CUr Config. current output
Cur Config. fault output
cur Default current setpoint
dAY Days
dFt Fault Configuration
d-O Display output
d-t Display temperature
diS Display Convention
doc Display output in mA
doF Relay delay off time
don Relay delay on time
dPn Dampen output
dtS LCD/LED Display test
dur Timer duration
Ein Display mV input
DF Temperature °F
FLt Use alarm as fault alarm
Hi Relay action - high
H-L Alarm logic
hr Hours
HYS Hysteresis
int Interval period
Int Timer setup
iPH Isopotential pH
iSO Isopotential point
Lo Relay action - low
non No action on fault
OFF Alarm not used
ont Timer on time
oFF Relay open on fault
On Use alarm as process alarm
OFt Timer off time
OId Old electrode impedance limit
Or U.S. Convention
OUt Current output
Pct Display output in percent
rL1 Relay 1 fault setup
rL2 Relay 2 fault setup
rES Impedance value
rPH Normal process pH
rO European Convention
SEC Seconds
SHt Cracked glass impedance
limit
SHO Show fault history
t-C Temperature config.
tCO Temperature coefficient
tiL Timer - time remaining
tOn Timer status
UEr User version
uin Minutes
420 4mA to 20mA output
020 0mA to 20mA output
TABLE 3-3. Set Function Mnemonics
TABLE 3-2. Information Mnemonics