Ross Acuity - Redundant Power (Panel Only); Auxiliary Control Panels; Ultritouch; Extended Warranty (Panel Only)

DescriptionOption
Adds the top row of modules to the
A2M control panel.
A2MP-ROW-ADD
Adds the top row of modules to the
A2X control panel.
A2XP-ROW-ADD
Adds the top row of modules to the
A2XDD control panel.
A2XDDP-ROW-ADD
Adds the top row of modules to the
A3M control panel.
A3MP-ROW-ADD
Adds the top row of modules to the
A3 control panel.
A3P-ROW-ADD
Adds the top row of modules to the
A4 control panel.
A4P-ROW-ADD
Redundant Power (Panel Only)
The redundant power option adds an additional power
supply to the control panel. In the event that one power
supply should fail, or the power to that supply is
interrupted, the other power supply carries the load of
the control panel.
DescriptionOption
Adds redundant power to the A1S
control panel.
A1SP-REDPSU
Adds redundant power to the A2M
control panel.
A2MP-REDPSU
Adds redundant power to the A2X
control panel.
A2XP-REDPSU
Adds redundant power to the A3M
control panel.
A3MP-REDPSU
Adds redundant power to the A3
control panel.
A3P-REDPSU
Adds redundant power to the A4
control panel.
A4P-REDPSU
Adds redundant power to the CB1
control panel.
PSU-12V16A-6PIN
Adds redundant power to the CB2
control panel.
PSU-12V16A-6PIN
Auxiliary Control Panels
The Auxiliary Control Panel is designed to extend the
control surface of your Acuity
®
control panel by
providing access to another source bus that can be quickly
assigned to any aux bus on the switcher. Additional
Auxiliary Control Panels can be daisy-chained together
from the same external link port on the control panel.
The maximum number of Auxiliary Control Panels that
can be daisy-chained together depends on the size of the
Auxiliary Control Panel.
• AP-AUX2RU24 – up to 6 daisy-chained together
• AP-AUX2RU32 – up to 6 daisy-chained together
• AP-AUX2RU40 – up to 4 daisy-chained together
The Auxiliary Control Panel is a self contained unit that
has both primary and redundant power supplies. It is
designed to mount either on the back of the control panel
or into a desk.
Table 7: Auxiliary Control Panel
DescriptionOption
Adds the Auxiliary Control Panel with
a single panel row with 24 source
buttons, 6 bank select and 8 aux
buttons, and 14 control buttons. Fits
the A1S, A2M, and A3M control
panels.
AP-AUX2RU24
The same features as the previous
panel, but with 32 source buttons. Fits
the A2X and A3 control panels.
AP-AUX2RU32
The same features as the previous
panel, but with 40 source buttons. Fits
the A4 control panels.
AP-AUX2RU40
Adds a redundant power supply for
the Auxiliary Control Panel Panel.
PSU-12V4A-2PIN
Ultritouch
The 2RU rack mountable Ultritouch adaptable system
control panel allows you to control some aspects of
switcher operation using a DashBoard interface.
The DashBoard interface on Ultritouch provides control
over aux bus source selections. You must connect to the
switcher from Ultritouch to be able to control the switcher
functions. Refer to the Ultritouch documentation for
information on navigating the Ultritouch menu and
manually connecting to a device.
Table 8: Auxiliary Control Panel
DescriptionOption
Adds the 2RU Ultritouch adaptable
system control panel.
ULTRITOUCH-2
Adds a redundant power supply for
Ultritouch.
ULTRITOUCH-PS
Extended Warranty (Panel Only)
Extends the standard one-year warranty on your control
panel by one year. Additional years can be purchased if
required.
Acuity UHD Configuration Guide (v9.1) — Switcher Options and Configurations • 15