Ross Acuity - Multiviewers

Table 10: 8RU Frame Options
DescriptionOption
Adds ME 1, providing 4 keyers, 8
channels of 2D DVE, 2 channels of
ME-Store, and a dual border
generators with advanced key trails
and key smear. This option cannot be
combined with the ACU8-MV7 and
ACU8-MV8 option.
ACU8-UHD-ME1
Adds ME 2 with the same features as
above. This option cannot be
combined with the ACU8-MV5 and
ACU8-MV6 options.
ACU8-UHD-ME2
Adds ME 3 with the same features as
above. This option cannot be
combined with the ACU8-MV3 and
ACU8-MV4 options.
ACU8-UHD-ME3
Adds ME 4 with the same features as
above. This option cannot be
combined with the ACU8-MV1 and
ACU8-MV2 options.
ACU8-UHD-ME4
MultiViewers
The switcher does not come with any MultiViewers as
standard. Every MultiViewer option adds a 3G Video
Processor board with the hardware to support the
MultiViewer option.
The MultiViewer option can either be ordered as a
standalone MultiViewer or a MultiViewer with 2 oating
3D DVE keys. The oating 3D DVEs are available to
every ME in the switcher. Only the rst 4 MultiViewer
options can include the oating 3D DVE.
Tip: Any ME can be turned into a MultiViewer at no additional
cost, but at the loss of the ME.
MultiViewer options must be added in order starting with
MultiViewer 1 (ACU4-MV1 or ACU8-MV1).
Note: The ME and MultiViewer options use the same hardware
and cannot both be active at the same time. For example, ME
1 and MultiViewer 8 use the same hardware and cannot both
be on at the same time.
Table 11: 4RU Frame Options
DescriptionOption
Adds MultiViewer 1, providing 4
MultiViewer heads that can display
up to 32 sources in 41 independent
layouts. All MultiViewer heads share
the same pool of 32 sources. This
option cannot be combined with the
ACU4-UHD-ME3 option.
ACU4-MV1
DescriptionOption
Adds MultiViewer 1 and 2 with the
same features as above with the
addition of 2 floating 3D DVE keys.
This option cannot be combined with
the ACU4-UHD-ME3 option.
ACU4-UHD
-FLOAT-3DDVE-1
Adds MultiViewer 2 with the same
features as above. This option cannot
be combined with the
ACU4-UHD-ME3 option.
ACU4-MV2
Adds MultiViewer 3 with the same
features as above. This option cannot
be combined with the
ACU4-UHD-ME2 option.
ACU4-MV3
Adds MultiViewer 4 with the same
features as above. This option cannot
be combined with the
ACU4-UHD-ME2 option.
ACU4-MV4
Adds MultiViewer 5 with the same
features as above. This option cannot
be combined with the
ACU4-UHD-ME1 option.
ACU4-MV5
Adds MultiViewer 6 with the same
features as above. This option cannot
be combined with the
ACU4-UHD-ME1 option.
ACU4-MV6
Table 12: 8RU Frame Options
DescriptionOption
Adds MultiViewer 1, providing 4
MultiViewer heads that can display
up to 32 sources in 41 independent
layouts. All MultiViewer heads share
the same pool of 32 sources. This
option cannot be combined with the
ACU8-UHD-ME4 option.
ACU8-MV1
Adds MultiViewer 2 with the same
features as above. This option cannot
be combined with the
ACU8-UHD-ME4 option.
ACU8-MV2
Adds MultiViewer 1 and 2 with the
same features as above with the
addition of 2 floating 3D DVE keys.
This option cannot be combined with
the ACU8-UHD-ME4 option.
ACU8-UHD
-FLOAT-3DDVE-1
Adds MultiViewer 3 with the same
features as above. This option cannot
be combined with the
ACU8-UHD-ME3 option.
ACU8-MV3
Adds MultiViewer 4 with the same
features as above. This option cannot
be combined with the
ACU8-UHD-ME3 option.
ACU8-MV4
Acuity UHD Configuration Guide (v9.1) — Switcher Options and Configurations • 19