Ross Acuity - Training and Commissioning Options; Commissioning, 1-Day (ACUITY-COM-1 DAY); Online Training, 1-Day (ACUITY-ONL-1 DAY); Operations Training, 1-Day (ACUITY-OTR-1 DAY)

Extended Warranty (Frame Only)
Extends the standard one-year warranty on your frame
by one year. Additional years can be purchased if
required.
When adding the extended warranty for your frame, quote
the ordering code for the highest number of MEs in your
switcher.
Table 19: 4RU Frame Extended Warranty Options
DescriptionOption
Extends the warranty on the 4RU
frame with 1 ME by a year.
ACU4-UHD-ROSSCARE
-ME1
Extends the warranty on the 4RU
frame with 2 MEs by a year.
ACU4-UHD-ROSSCARE
-ME2
Extends the warranty on the 4RU
frame with 3 MEs by a year.
ACU4-UHD-ROSSCARE
-ME3
Table 20: 8RU Frame Extended Warranty Options
DescriptionOption
Extends the warranty on the 8RU
frame with 1 ME by a year.
ACU8-UHD-ROSSCARE
-ME1
Extends the warranty on the 8RU
frame with 2 MEs by a year.
ACU8-UHD-ROSSCARE
-ME2
Extends the warranty on the 8RU
frame with 3 MEs by a year.
ACU8-UHD-ROSSCARE
-ME3
Extends the warranty on the 8RU
frame with 4 MEs by a year.
ACU8-UHD-ROSSCARE
-ME4
Training and Commissioning Options
Commissioning, 1-Day (ACUITY-COM-1DAY)
Once the customer has installed and cabled the
equipment, a Ross Commissioning expert will come on
site to get the switcher congured, verify that all
peripheral interfaces are operating properly, provide a
basic technical orientation, and help you get on the air.
Training is provided on the customer's equipment at their
site. Expenses are extra, and billed at the completion of
the visit. Ross Video cannot guarantee the availability
of a local Trainer, as such, travel costs to all locations
will be invoiced at cost. Two (2) days, or more, of
training is recommended for multiple MLE systems. Four
(4) weeks advanced scheduling notice is required.
Additional days of training can be added if required.
Customers cancellation or rescheduling of services
without seven (7) calendar days advanced notice will
incur full invoice.
Note: Commissioning does not replace operator or technical
training. Contact your Ross Video Sales Representative to
discuss which types of assistance are best suited to your needs.
Online Training, 1-Day (ACUITY-ONL-1DAY)
Comprehensive, web-based, online training is available
from Ross Video trainers.
Two (2) days, or more, of training is recommended for
multiple ME systems. Four (4) weeks advanced
scheduling notice is required. Additional days of training
can be added if required.
Customers cancellation or rescheduling of services
without seven (7) calendar days advanced notice will
incur full invoice.
Operations Training, 1-Day (ACUITY-OTR-1DAY)
Operations training is highly recommended to ensure
that the process of taking your Ross Video switcher to
air is a smooth one.
Training is provided on the customer's equipment at their
site. Expenses are extra, and billed at the completion of
the visit. Ross Video cannot guarantee the availability
of a local Trainer, as such, travel costs to all locations
will be invoiced at cost. Two (2) days, or more, of
training is recommended for multiple MLE systems. Four
(4) weeks advanced scheduling notice is required.
Additional days of training can be added if required.
Customers cancellation or rescheduling of services
without seven (7) calendar days advanced notice will
incur full invoice.
Technical Training, 1-Day (ACUITY-OTT-1DAY)
Onsite technical training introduces the user to some of
the technical aspects of switcher operation and
maintenance. This includes, but is not limited to; Basic
operation, Switcher installation and congurations,
Peripheral interfaces, Video signal ow, System timing
requirements, Circuit block diagrams, Circuit board
overviews, Jumpers and indicators, Troubleshooting tips,
Software upgrading, and Routine maintenance.
Training is provided on the customer's equipment at their
site. Expenses are extra, and billed at the completion of
the visit. Ross Video cannot guarantee the availability
of a local Trainer, as such, travel costs to all locations
will be invoiced at cost. Two (2) days, or more, of
training is recommended for multiple MLE systems. Four
(4) weeks advanced scheduling notice is required.
Additional days of training can be added if required.
Customers cancellation or rescheduling of services
without seven (7) calendar days advanced notice will
incur full invoice.
22 • Switcher Options and Configurations — Acuity UHD Configuration Guide (v9.1)