DescriptionOption
Adds MultiViewer 3 and 4 with the
same features as above with the
addition of 2 floating 3D DVE keys.
This option cannot be combined with
the ACU8-UHD-ME4 option.
ACU8-UHD
-FLOAT-3DDVE-2
Adds MultiViewer 5 with the same
features as above. This option cannot
be combined with the
ACU8-UHD-ME2 option.
ACU8-MV5
Adds MultiViewer 6 with the same
features as above. This option cannot
be combined with the
ACU8-UHD-ME2 option.
ACU8-MV6
Adds MultiViewer 7 with the same
features as above. This option cannot
be combined with the
ACU8-UHD-ME1 option.
ACU8-MV7
Adds MultiViewer 8 with the same
features as above. This option cannot
be combined with the
ACU8-UHD-ME1 option.
ACU8-MV8
3D DVE
The 3D DVE option allows every type of key to be
squeezed or zoomed, cropped, repositioned, and rotated
in 3D space. It can also perform 3D key or background
transitions, or build sequences with complex timelines,
keyframe editing, and quick sequence recall. 3D DVE
also comes equipped with a positionable light source,
preprocessor effects such as defocus, mosaic,
posterization, colorization, strobe, picture frame borders,
timeline sequences with holds, and a lot more.
Each 3D DVE option provides 1 channel of 3D DVE per
ME. Each 3D DVE channel has 2 channel resources,
allowing for up to 2 channel resources to be dedicated
to each key. This allows you to y a key, or combine
two preset pattern keys in a single keyer for a 2-box.
Preset pattern keys only use a single DVE channel
resource and all other key types use 2.
Note: 3D DVE Warp effects are not available in UHDTV1.
Table 13: 4RU Frame
DescriptionOption
Adds 1 channel of 3D DVE to ME 1.ACU4-UHD-3DDVE-ME1
Adds the same features as above to
ME 2.
ACU4-UHD-3DDVE-ME2
Adds the same features as above to
ME 3.
ACU4-UHD-3DDVE-ME3
Table 14: 8RU Frame
DescriptionOption
Adds 1 channel of 3D DVE to ME 1.ACU8-UHD-3DDVE-ME1
Adds the same features as above to
ME 2.
ACU8-UHD-3DDVE-ME2
Adds the same features as above to
ME 3.
ACU8-UHD-3DDVE-ME3
Adds the same features as above to
ME 4.
ACU8-UHD-3DDVE-ME4
Port Expander
This option adds a Comtrol
®
DeviceMaster
®
with four
(4) serial ports, effectively increasing the number of
available panel remote ports for device control by four
(4). The Comtrol
®
DeviceMaster
®
connects to the
switcher over a single TCP/IP link and then to each
device over a dedicated serial port that can be congured
as either RS-232 or RS-422.
DescriptionOption
Adds a Comtrol
®
DeviceMaster
®
to
the 4RU frame.
ACU4-NetExpander
Adds a Comtrol
®
DeviceMaster
®
to
the 8RU frame.
ACU8-NetExpander
Device Support
The Acuity
®
switcher comes standard with support for
controlling external VTR (BVW-75), video servers
(VDCP, AMP protocols), audio servers, and monitor
walls, as well as devices that support the native RossTalk,
serial tally, and Pbus protocols. Support for additional
classes of devices can be added as required.
The functionality that is supported for a particular device
depends on the protocol that is used to control the device
and the features that the device has available. Visit the
Ross Video rossvideo.com/acuity-device/ for a complete
list of supported devices.
Table 15: 4RU Frame
DescriptionOption
Adds support for controlling a routing
switcher to the 4RU frame.
ACU4-ROUTER
Adds support for controlling a robotic
camera system to the 4RU frame.
ACU4-ROBOCAM
Adds support for controlling a
character generator to the 4RU frame.
ACU4-CGCII
Adds support for controlling a small
audio mixer (16 and fewer inputs) to
the 4RU frame.
ACU4-AUDMIXSM
20 • Switcher Options and Configurations — Acuity UHD Configuration Guide (v9.1)
To Next Page
Loading...
