Ross Acuity - Audio Control Module; Shot Box Module

DescriptionOption
Extends the warranty on the A1S by
a year.
A1SP-ROSSCARE
Extends the warranty on the A1SDD
by a year.
A1SDDP-ROSSCARE
Extends the warranty on the A2M by
a year.
A2MP-ROSSCARE
Extends the warranty on the A2MDD
by a year.
A2MDDP-ROSSCARE
Extends the warranty on the A2X by
a year.
A2XP-ROSSCARE
Extends the warranty on the A2XDD
by a year.
A2XDDP-ROSSCARE
Extends the warranty on the A3M by
a year.
A3MP-ROSSCARE
Extends the warranty on the A3MDD
by a year.
A3MDDP-ROSSCARE
Extends the warranty on the A3 by a
year.
A3P-ROSSCARE
Extends the warranty on the A3DD
by a year.
A3DDP-ROSSCARE
Extends the warranty on the A4 by a
year.
A4P-ROSSCARE
Extends the warranty on the A4DD
by a year.
A4DDP-ROSSCARE
Extends the warranty on the CB1 by
a year.
CB1-PANEL-ROSSCARE
Extends the warranty on the CB2 by
a year.
CB2-PANEL-ROSSCARE
Audio Control Module
The Audio Control module provides eight motorized
audio faders with source mnemonics that can be mapped
to audio channels, or groups, from an audio mixer
controlled by the switcher.
AUDIO CONTROL
When ordering a module with a new control panel, you
must specic the empty slot on the control panel that you
want the module installed into. Refer to Panel
Dimensions with Slot Locations on page 32 for slot
locations.
DescriptionOption
Installs the Audio Control module in
slot 1 of your control panel. Can only
be ordered with a new control panel.
AP-AUDIO-SL1
Installs the Audio Control module in
slot 2 of your control panel. Can only
be ordered with a new control panel.
AP-AUDIO-SL2
Installs the Audio Control module in
slot 3 of your control panel. Can only
be ordered with a new control panel.
AP-AUDIO-SL3
Provides the Audio Control module
as a field upgrade kit. Can only be
ordered for an existing control panel
installation.
AP-AUDIO-UPG
Provides the Audio Control module in
a SideBoxNet enclosure. The
SideBoxNet enclosure allows you to
mount a single module separate from
your control panel. Each enclosure
has independent primary and
secondary power supplies and an
ethernet port to connect the enclosure
to your switcher.
AP-SIDESLIDE-E
Shot Box Module
The Shot Box module provides an additional 28
assignable custom control buttons. Custom Controls from
various banks can be grouped together on a single Shot
Box Page. Each Shot Box can access up to 28 pages of
buttons.
CUSTOM CONTROL SHOT BOX
When ordering a module with a new control panel, you
must specic the empty slot on the control panel that you
want the module installed into. Refer to Panel
Dimensions with Slot Locations on page 32 for slot
locations.
DescriptionOption
Installs the Shot Box module in slot 1
of your control panel. Can only be
ordered with a new control panel.
AP-SHOTBOX-SL1
Installs the Shot Box module in slot 2
of your control panel. Can only be
ordered with a new control panel.
AP-SHOTBOX-SL2
Installs the Shot Box module in slot 3
of your control panel. Can only be
ordered with a new control panel.
AP-SHOTBOX-SL3
16 • Switcher Options and Configurations — Acuity UHD Configuration Guide (v9.1)