To Next Page
S
Samantha RobinsonJul 30, 2025
What to do if my Ross DVB-S 5010 Receiver says 'No signal'?
- TTammy RobertsJul 30, 2025
If your Ross Receiver displays 'No signal', there are several potential causes: * The dish installation might be incorrect, so carefully re-align the dish. * The LNB input might not be connected, so ensure you connect the LNB. * The satellite might not be transmitting, so try another satellite. * Weather conditions, such as snow, might be affecting reception, so attempt again later. * The program setup or system settings might be incorrect, so set the correct parameters for the received program in the system settings menu.
General
